Drinking Fountain Set

Ergonomic design and a soft push button draw
Kull's cool drinking water dispenser.

For health this spring taps has been installed everywhere and the filigree water jet is bubbling as long as the button is pressed ...
in schools - public places - spa parks - shopping centers - sauna - Hotel Wellness Oasen.
Now your project is missing!

This drinking water fitting has a double net filter made of stainless steel to obtain a uniformly parabolic water jet. The parabolic water jet (radiant intensity) can be adjusted from the front with a 4 mm Allen key.
This fitting is delivered with a 3/8 "nipple of 17 mm including nut and has a 1/8" connection on the bottom for Rilsan pipes. The flange surface has a rubber backing and a stainless steel pin to prevent twisting after installation.

Please note our general operating instructions:
rinse
pipe thoroughly before (re-)commissioning with approx. 3-4 litres of water to remove and remove dirt.
water pressure of 6 bar must not be exceeded.
- Completely empty water-carrying elements in the outdoor area before the first frost (blow out with compressed air if necessary) and, if possible, dismantle them.
- rooster not too tightly to turn, but only until it closes completely.
stainless steel fittings regularly (with our cleaning and care product Art.-No. 45.083).
- Do not use sharp cleaning agents in paint surfaces, instead we recommend our cleaning agent (Art. No. 45.083) to avoid possible damage to the fittings.

Please note our general operating instructions:
rinse
pipe thoroughly before (re-)commissioning with approx. 3-4 litres of water to remove and remove dirt.
water pressure of 6 bar must not be exceeded.
- Completely empty water-carrying elements in the outdoor area before the first frost (blow out with compressed air if necessary) and, if possible, dismantle them.
- rooster not too tightly to turn, but only until it closes completely.
stainless steel fittings regularly (with our cleaning and care product Art.-No. 45.083).
- Do not use sharp cleaning agents in paint surfaces, instead we recommend our cleaning agent (Art. No. 45.083) to avoid possible damage to the fittings.