Frost-proof Outdoor Valve

Frost-protected exterior wall valve set in Bronze
With Nose to Attach the Watering Can including Backflow prevents And Pipe Ventilators.
Ideal for Historical Buildings in The Protection Of monuments.
Simple Assembly including Fastening Material for Wall Thicknesses from 13 to 50 cm, suitable for Shell Construction with later Fine installation or immediate complete Assembly.
This Outdoor Faucet with Frost protection in the Wall performance, is approved according to DVGW VP 648 for drinking Water PN 10-temperature resistance up to 90°C-with built-in Safety combination HD according to A4 EN 1717 (Backflow vunder And Pipe Ventilator) or A4 1988-4.

Backflow prevents And Pipe Ventilators

Please note our general operating instructions:
rinse
pipe thoroughly before (re-)commissioning with approx. 3-4 litres of water to remove and remove dirt.
water pressure of 6 bar must not be exceeded.
- Completely empty water-carrying elements in the outdoor area before the first frost (blow out with compressed air if necessary) and, if possible, dismantle them.
- rooster not too tightly to turn, but only until it closes completely.
stainless steel fittings regularly (with our cleaning and care product Art.-No. 45.083).
- Do not use sharp cleaning agents in paint surfaces, instead we recommend our cleaning agent (Art. No. 45.083) to avoid possible damage to the fittings.