Threaded tap connector

Threaded tap connector

Innovative "Click" hose plug-in system for absolute robustness.
Great selection in all types and sizes for the garden hose connection.
The coupling piece has shown to be less susceptible to contamination than other plug-in mechanisms and can be combined with virtually any plug-in system available on the market.
The big advantage is not only its robustness: the system has a circa 15 percent higher water flow and is therefore recommended for professional irrigation solutions in commercial as well as in the demanding private garden area.

Please note our general operating instructions:
rinse
pipe thoroughly before (re-)commissioning with approx. 3-4 litres of water to remove and remove dirt.
water pressure of 6 bar must not be exceeded.
- Completely empty water-carrying elements in the outdoor area before the first frost (blow out with compressed air if necessary) and, if possible, dismantle them.
- rooster not too tightly to turn, but only until it closes completely.
stainless steel fittings regularly (with our cleaning and care product Art.-No. 45.083).
- Do not use sharp cleaning agents in paint surfaces, instead we recommend our cleaning agent (Art. No. 45.083) to avoid possible damage to the fittings.