"Click" Hose connection M24 AG with beam former

"Click" Hose connection suitable for all common clutch systems.
Connection thread M24 with built-in beam former.

Innovative "Click" hose plug-in system for absolute robustness.
Great selection in all types and sizes for the garden hose connection.
The coupling piece has shown to be less susceptible to contamination than other plug-in mechanisms and can be combined with virtually any plug-in system available on the market.
The big advantage is not only its robustness: the system has a circa 15 percent higher water flow and is therefore recommended for professional irrigation solutions in commercial as well as in the demanding private garden area.

In enclose contained:

Please note our general operating instructions:
rinse
pipe thoroughly before (re-)commissioning with approx. 3-4 litres of water to remove and remove dirt.
water pressure of 6 bar must not be exceeded.
- Completely empty water-carrying elements in the outdoor area before the first frost (blow out with compressed air if necessary) and, if possible, dismantle them.
- rooster not too tightly to turn, but only until it closes completely.
stainless steel fittings regularly (with our cleaning and care product Art.-No. 45.083).
- Do not use sharp cleaning agents in paint surfaces, instead we recommend our cleaning agent (Art. No. 45.083) to avoid possible damage to the fittings.