Zur Startseite von Kull Design Edelstahl Wasserhähne

Product index

A-B C-D E-F G-H I-J K-L M-N O-P Q-R S-T U-V W-X Y-Z

 

Accessory adapter
Accessory adapter
Accessory adapter
Solid brass 1/2" quick connect male to 3/4"
Adapter from 1/2 to 3/4 inch 3,6 cm

Universeller Anschluss – Wende Nippel als Gewindeübergang und Verlängerung
¾" Außen-Gewinde mit ½" Innen-Gewinde und 1/2" Außen-Gewinde.
Mit Innenvielzahn (12er Imbusschlüssel) - für leichte Montage!
additional shuf
additional shuf off valve or garden hose
Height and side indication
Aerator

The beam controller

Also called a pearl, mixed nozzle or faucet , is located at the outlet opening of the tap. This is responsible for the perfect beam quality. The water we are mixed here with air and thus more pleasant during the water leak, crystal clear and splash free.
The perlator holds back lime and other coarse solids such as deposits and stones.
Vandalism protection -no impressions are possible due to the honeycomb structure!

Aerator cone with O-ring
Aerator cone with O-ring
Anchoring Ring for DG12000
Anchoring Ring (DG12000) for attaching hose winder or basins
Anchoring Ring for DG12000
Anchoring Ring (DG12000) for attaching hose winder or basins
back gauge junior
back gauge - of the junior
Ball valve 3/4"
Ball valve 3/4", threaded male/female
Quick taps (open/close in 1/4 turn) with ball valve and double teflon gasket, hole diameter 10 mm
Ball valve 3/4"
Ball valve 3/4", threaded male/female
Quick taps (open/close in 1/4 turn) with ball valve and double teflon gasket, hole diameter 19 mm.
Barrel nipple raw 3/4"
Barrel nipple raw
Base body for wall shower DG13600-E
base body device in stainless steel finish for the wall showers
Base body for wall shower DG13600-M
base body device in brass finish for the wall showers
Base plate for wall shower
Base plate for wall shower
Basin for water dispenser
Basin for water dispenser with use of anchoring ring drainage plug included, Ø 36 cm, stainless steel/brass
Beam former insert

Beam former insert

Beam former insert 3/4" AG
Beam former insert
Brass cap IG 3/4" with seal
Hexagonal brass cap with 3/4" internal thread and seal
as end cap - cap

Brass Tap Connector
Solid brass 1/2" quick connect male to 3/4"
Bronze Elbow
Bronze Elbow

Zum Seitenanfang / Top of Page