Overflow standpipe 2 "height 5-50cm selectable
Standpipe - overflow - drain fitting,
water level height 5-50cm selectable, other heights on request.
The mushroom cap dips approx. 5 mm into the water surface and prevents leaves etc. from entering the drain or clogging. The bottom flange with seal and 2 inch connecting thread is screwed into the connecting sleeve in the trough bottom.
Overflow standpipe for 100 KG socket, height 5-50cm selectable
standpipe - overflow - with a diameter of 100 mm fits into a 100-diameter HT-sleeve.
length 50 cm minus insertion depth in KG-muff6 cm results in a water level height of 44 cm.
The mushroom cap dips approx. 5 mm into the water surface and thus prevents leaves etc. from penetrating or clogging into the drain.
Overflow standpipe for 50 mm HT socket, height 5-50cm selectable
Standpipe - overflow - with a diameter of 48 mm fits into a 50 mm HT socket.
Length 5-50 cm selectable minus insertion depth in HT socket 5 cm results in a water level of 38 cm.
The mushroom cap dips approx. 5 mm into the water surface and thus prevents leaves etc. . can penetrate the drain or become clogged.
Overflow standpipe ø 70 mm 30cm 21/2"
Standpipe - overflow - drain fitting,
water level height 5-50cm selectable, other heights on request.
The mushroom cap dips approx. 5 mm into the water surface and prevents leaves etc. from entering the drain or clogging. The bottom flange with seal and 2 1/2 inch connecting thread is screwed into the connecting sleeve in the trough bottom.
parts
Backflow preventer holder DN20 3/4 "x MF30 Brass
Planter 149X149X55cm stainless steel powdered
Stainless Steel - Planter
This planter is a powder-coated planter made of high-quality stainless steel.
The dimensions are a square outer contour of 900 x 990 mm with a height of 550 mm.
The planter has no bottom.
For stabilization, two crossing cross braces are attached just above the bottom edge.
The top and bottom edges are beveled - all corners and edges are sanded clean.
The planter is delivered in one piece.
Foundation: provided by the customer To protect the roots from frost and heat damage, we recommend lining the walls with at least 20 mm insulation made of PUR insulation protection panels.
Planter 149X149X80cm stainless steel powdered
Stainless Steel - Planter
This planter is a powder-coated planter made of high-quality stainless steel.
The dimensions are a square outer contour of 900 x 990 mm with a height of 550 mm.
The planter has no bottom.
For stabilization, two crossing cross braces are attached just above the bottom edge.
The top and bottom edges are beveled - all corners and edges are sanded clean.
The planter is delivered in one piece.
Foundation: provided by the customer To protect the roots from frost and heat damage, we recommend lining the walls with at least 20 mm insulation made of PUR insulation protection panels.
Planter 149X99X55cm stainless steel powdered
Stainless Steel - Planter
This planter is a powder-coated planter made of high-quality stainless steel.
The dimensions are a square outer contour of 900 x 990 mm with a height of 550 mm.
The planter has no bottom.
For stabilization, two crossing cross braces are attached just above the bottom edge.
The top and bottom edges are beveled - all corners and edges are sanded clean.
The planter is delivered in one piece.
Foundation: provided by the customer To protect the roots from frost and heat damage, we recommend lining the walls with at least 20 mm insulation made of PUR insulation protection panels.
Planter 149X99X80cm stainless steel powdered
Stainless Steel - Planter
This planter is a powder-coated planter made of high-quality stainless steel.
The dimensions are a square outer contour of 900 x 990 mm with a height of 550 mm.
The planter has no bottom.
For stabilization, two crossing cross braces are attached just above the bottom edge.
The top and bottom edges are beveled - all corners and edges are sanded clean.
The planter is delivered in one piece.
Foundation: provided by the customer To protect the roots from frost and heat damage, we recommend lining the walls with at least 20 mm insulation made of PUR insulation protection panels.
Planter 99X99X55xm stainless steel powdered
Stainless Steel - Planter
This planter is a powder-coated planter made of high-quality stainless steel.
The dimensions are a square outer contour of 900 x 990 mm with a height of 550 mm.
The planter has no bottom.
For stabilization, two crossing cross braces are attached just above the bottom edge.
The top and bottom edges are beveled - all corners and edges are sanded clean.
The planter is delivered in one piece.
Foundation: provided by the customer To protect the roots from frost and heat damage, we recommend lining the walls with at least 20 mm insulation made of PUR insulation protection panels.
Planter 99X99X80cm stainless steel powdered
Stainless Steel - Planter
This planter is a powder-coated planter made of high-quality stainless steel.
The dimensions are a square outer contour of 900 x 990 mm with a height of 550 mm.
The planter has no bottom.
For stabilization, two crossing cross braces are attached just above the bottom edge.
The top and bottom edges are beveled - all corners and edges are sanded clean.
The planter is delivered in one piece.
Foundation: provided by the customer To protect the roots from frost and heat damage, we recommend lining the walls with at least 20 mm insulation made of PUR insulation protection panels.
