Zur Startseite von Kull Design Edelstahl Wasserhähne

Product index

A-B C-D E-F G-H I-J K-L M-N O-P Q-R S-T U-V W-X Y-Z

 

screw adjusting member
screw adjusting member
seal ø 20 x 2,5 mm
O-rings ø 20 x 2,5 mm
seal ø 28,5 x 23,0 mm red
water seal ø 28,5 x 23,0 mm red
Self Closure headpart
This option is available if you want a self-closing top when reordering a faucet or well pipe instead of a cross-rotary valve top. The above surcharge is for this.

If you want a self-closing button extra, this is the item no.:45.039N

Self-closing button installed
Self-closing button installed
Selvclose Water Tap ø3x08cm
Selvclose Water Tap
Shower Holder 24 inches
Shower wall arm stylish in stainless steel matt satin

Shower plate 25cm
stainless steel shiny
overhead shower 250 mm round, with QuickClean, swiveling ball joint. Connection thread 1/2 "IT
Shower wall arm 40 cm
The simple shower arm made of stainless steel has a diameter of 30 mm and a projection of around 400 mm.
On the wall and at the front, ½ “connections are built in to enable quick and easy installation
Please note that no shower plate is included. This must be ordered as required.
Shower-Set
shower pipe with volume shower head click-in connexion and shut off valve water outlet, H. 190 cm
Shower-Set
shower pipe with volume shower head click-in connexion and shut off valve water outlet, H. 190 cm
Shut-off valve 1/2" - without rosette-
Shut-off valve for recessed or flush
Sign "No drinking water" font sublime
"No drinking water"
Information sign for wells and springs.

socket modul Swiss -Exchange-
Swiss socket module installed in the power column (rather than German SCHUKO Socket)

1-3 piece - please specify (price per module)

socket RCD-protected -Exchange-
RCD-protected socket outlet 30 mA, RCD 30 mA Function The functional principle is voltage independent, as for a RCD switch. The devices RCD-protected socket outlet and RCD are permanently installed protective devices with voltage-dependent residual current tripping acc. to VDE 0664
Socket with folding lid
-German standard
Steckdose mit Klappdeckel
Vierlochbefestigung mit Flanschdichtung, 16A2p+E, 230V, IP54, unverdrahtet - Schraubkontakt mit Leitungszuführung von unten

Socket wrench for 4-piece upper Part 6 x 6 mm
Spare hard-plastic key for topparts with inside 4 known 6 x 6 mm
.
Special colour
You can see a right RAL colours with the sketch. You can see a patina pattern right in color chart.

Speier connection M24 internal thread
threaded Connection M24x1 welded on the front end of the spout for system connection parts.
For example, a beam former 45,159 or garden hose connection 40,633 as well as other system components can be screwed into the internal thread.
square key G1/2"
Lockable top DN 15 with backflow dandderer and 2 keys.
The black rotary handle with built-in safety lock, can be inserted into all taps with 1/2 "top.
Secure for unauthorized use: Simply complete-the handle then allows to rotate, but without opening the water.
standard compression valve G1/2"
standard compression valve G1/2"
standard compression valve G1/2"
standard compression valve G1/2"
standard compression valve G1/2"
standard compression valve G1/2"
standard compression valve G1/2" with square key
standard compression valve G1/2" square key
standard compression valve G1/2"x30mm
standard compression valve G1/2"x430mm
standard compression valve G1/2"x46mm
standard compression valve G1/2"x46mm
standard compression valve G3/4"
Traditionelle HEADPART G 3/4"
standard compression valve G3/4"
Traditionelle HEADPART G 3/4"
Storage grate firmly attached to wells for watering can
Rust firmly attached to the well to turn off the watering can when filling.
Storage ost for wells ø 1,6
-individually according to the bar according to the
Individual storage grate for watering can made of individual stainless steel rods of 16 mm.
length according to specification.
Support approx. 50 mm
anchorage by means of a fastening pin of 6 x 30 mm - for locking in the well wall.

Storage ost for wells ø 2,0
-individually according to the bar according to the
Individual storage grate for watering can made of individual stainless steel rods of 20 mm.
length according to specification.
Support approx. 50 mm flattened to approx. 10 mm
anchorage by means of a fastening pin of 6 x 30 mm - for locking in the well wall.

tee fitting 1/2"
female tee Fitting 1/2"
tee fitting 3/4"
Brass female tee fitting
tee fitting 3/4"
female tee Fitting 3/4"
Test
You can see a right RAL colours with the sketch. You can see a patina pattern right in color chart.

threaded connection 1" IG
threaded connection 1" inside
threaded connection 3/4 I
threaded connection 3/4" inside
threaded plug 1 1/2"
threaded plug 1 1/2"
threaded plug 1 1/4"
threaded plug 1 1/4"
threaded plug 1"
threaded plug 1"
threaded plug 1/2"
threaded plug 1/2"
threaded plug 2"
threaded plug 2"
threaded plug 3/4"
threaded plug 3/4"
Threaded tap connector
Threaded tap connector
Threaded tap connector
Threaded tap connector
Threaded tap connector
Threaded tap connector
Threaded tap connector
Chrome hose connection
Threaded tap connector 1/2"
Threaded tap connector
Threaded tap connector 3/4"
Solid brass 3/4" quick connect male
Threaded tap connector 3/4"
Solid brass 3/4" quick connect male
Threaded transition ½ to ¾ inch
KULL Brass transition from ½ "to ¾" without the thread lengthening!
tube longer per 10 cm
Special sizes - tube longer per 10 cm
turning handle
turning handle with 4-Pin
turning handle with 1-Pin
turning handle with 1-Pin
turning handle with 1-Pin
turning handle with 1-Pin
turning handle with 4-Pin
turning handle with 4-Pin

Zum Seitenanfang / Top of Page