Water outlet 4.2*65cm
incl. connection thread 3/4 inch without rosette

With the kullDESIGN water outlets, you can upgrade your water point in no time at all.

The simple design in combination with the clean look of the glass bead blasted stainless steel or
A high-quality powder coating fits perfectly into any environment.
A ¾” female thread is incorporated on the back for assembly.
Thanks to the supplied reversible nipple, the outlet does not necessarily have to have a ¾"
external thread, but also fits a ¾” internal thread,
or a ½" internal or external thread.

- ATTENTION Rosette is not included in the scope of delivery –

spear
40.418 hose connector
45.217-¾" spout connection
45.309 aerator

Rosettes
40.534 rosette with sliding ring
45.063 security rosette
45.112-42*86 Fixed rosette
45.113-42*115 Fixed rosette
45.141 Connection rosette 1"

Other
40.259 console

Please note our general operating instructions:
rinse
pipe thoroughly before (re-)commissioning with approx. 3-4 litres of water to remove and remove dirt.
water pressure of 6 bar must not be exceeded.
- Completely empty water-carrying elements in the outdoor area before the first frost (blow out with compressed air if necessary) and, if possible, dismantle them.
- rooster not too tightly to turn, but only until it closes completely.
stainless steel fittings regularly (with our cleaning and care product Art.-No. 45.083).
- Do not use sharp cleaning agents in paint surfaces, instead we recommend our cleaning agent (Art. No. 45.083) to avoid possible damage to the fittings.